Exhaust Pipe Installation

Install the front pipe to the pipe support.

Install a new gasket and the front pipe to the exhaust manifold.

Install the front pipe with the 2 nuts.

Torque:

62 N*m{632 kgf*cm, 46 ft.*lbf}

Install the front pipe to the pipe support.

Install 2 new gaskets and the front pipe to the exhaust manifold.

Install the front pipe with the 2 bolts and 2 nuts.

Torque:

48 N*m{489 kgf*cm, 35 ft.*lbf}for nut

62 N*m{632 kgf*cm, 46 ft.*lbf}for bolt

NOTICE:

Do not reuse the gasket.

Using a vernier caliper, measure the free length of the compression spring.

Minimum length:

40.5 mm (1.5945 in.)

Install the center pipe to the 3 pipe supports.

Install a new gasket to the front exhaust pipe.

HINT:

Using a plastic-faced hammer, uniformly strike the gasket so that the gasket and front exhaust pipe fit properly.

NOTICE:

1. Be careful with the installation direction of the gasket.
   

1. Do not reuse the gasket.
   

1. To ensure a proper seal, do not use the tailpipe to force the gasket onto the front exhaust pipe.
   

Install the exhaust pipe with the 2 bolts and 2 springs.

Torque:

43 N*m{438 kgf*cm, 32 ft.*lbf}

Install a new gasket on the center exhaust pipe.

Install the tailpipe with the 2 bolts.

Torque:

48 N*m{489 kgf*cm, 35 ft.*lbf}

NOTICE:

Do not reuse the gasket.

Using SST, install the sensor to the front exhaust pipe.

SST

09224-00010

Torque:

40 N*m{408 kgf*cm, 30 ft.*lbf} for use with SST

44 N*m{449 kgf*cm, 32 ft.*lbf} for use without SST

HINT:

Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).

Connect the sensor connector.

Using SST, install the sensor to the front exhaust pipe.

SST

09224-00010

Torque:

40 N*m{408 kgf*cm, 30 ft.*lbf} for use with SST

44 N*m{449 kgf*cm, 32 ft.*lbf} for use without SST

HINT:

Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).

Connect the sensor connector.