Fuel Filter -- Installation |
| 1. INSTALL FUEL FILTER |
Install the fuel filter with the 3 nuts.
- Torque:
- 8.5 N*m{87 kgf*cm, 75 in.*lbf}
 |
Install the charcoal canister to the bracket.
| 2. CONNECT FUEL MAIN TUBE |
- NOTICE:
- Before installing the fuel main tube's connector to the fuel filter's upper pipe, check the connector for damage and foreign matter.
Connect the connector to the upper pipe. Push the 2 parts together firmly until a "click" sound is heard. Then attach the lock claws to the connector by pushing down on the connector cover.
Check that the connector and upper pipe are securely connected by trying to pull them apart.
Install the fuel tube grommet.
| 3. CONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY |
Connect the connector to the lower pipe. Push the two parts together firmly until a "click" sound is heard.
Check that the connector and lower pipe are securely connected by trying to pull them apart.
Connect the pipe to the clamp.
| 4. CONNECT CANISTER |
 |
Install the canister to the bracket.
Connect the air inlet line hose to the canister.
 |
Connect the purge line hose to the canister.
Connect the vent line hose to the canister.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. CHECK FOR FUEL LEAKS |
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON.
- NOTICE:
- Do not start the engine.
Push the intelligent tester main switch ON.
To perform the Active Test, enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump / Speed.
Check for fuel leaks.
Check that there are no fuel leaks after performing maintenance anywhere on the fuel system.