Drive Belt On-Vehicle Inspection


  1. INSPECT FAN & GENERATOR V BELT

Drive Belt -- On-Vehicle Inspection



1. INSPECT FAN & GENERATOR V BELT


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.1Kd-Ftv Engine Mechanical.Drive Belt.Drive Belt On-Vehicle Inspection
NOTICE:
It is unnecessary to measure the tension and flexibility of the V belt, as the vehicle is equipped with a V belt automatic tensioner.

  1. Make sure that the belt tensioner's indicator is within range B.
    If the mark is not in range B, replace the V belt.

    HINT:
    1. After the replacement of the V belt, make sure that the belt tensioner's indicator is within range A.

    2. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.1Kd-Ftv Engine Mechanical.Drive Belt.Drive Belt On-Vehicle Inspection
      After installing the V belt, check that it fits properly in the ribbed grooves. Check with your hand to confirm that the belt has not slipped out of the grooves on the bottom of the crank pulley.
    3. A "new belt" is a belt which has been used for less than 5 minutes on a running engine.
    4. A "used belt" is a belt which has been used on a running engine for 5 minutes or more.
    5. After installing a new belt, run the engine for approximately 5 minutes and then recheck the tension.