Place the timing belt case on wooden blocks.

• ПРИМЕЧАНИЕ:

• Do not damage the timing pointer.

Insert the drive and driven gears into the timing belt case with the marks facing the oil pump cover side.

Apply adhesive to 2 or 3 threads of the screws.

• Adhesive:
• Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

Install the oil pump cover with the 8 screws.

• Момент затяжки:
• 10 N*m{ 105 kgf*cm, 8 ft.*lbf}

Insert the relief valve and spring into the installation hole of the timing belt case.

Using a 12 mm hexagon wrench, install a new gasket and the plug.

• Момент затяжки:
• 37 N*m{ 375 kgf*cm, 27 ft.*lbf}