INSPECT TURN SIGNAL FLASHER ASSEMBLY

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  E19-7 (E) - Body ground	Always	Below 1 Ω

Measure the voltage according to the value(s) in the table below.

• Standard Voltage:

• Tester Connection	Switch Condition	Specified Condition
  E19-1 (IG) - E19-7 (E)	Engine switch on (IG)	11 to 14 V
  E19-2 (LR) - E19-7 (E)	Hazard warning switch off	Below 1 V
  	Hazard warning switch on	11 to 14 V
  E19-3 (LL) - E19-7 (E)	Hazard warning switch off	Below 1 V
  	Hazard warning switch on	11 to 14 V
  E19-4 (B) - E19-7 (E)	Always	11 to 14 V
  E19-5 (EL) - E19-7 (E)	Headlight dimmer switch (TURN L) off	9 V or higher
  	Headlight dimmer switch (TURN L) on	Below 1 V
  E19-6 (ER) - E19-7 (E)	Headlight dimmer switch (TURN R) off	9 V or higher
  	Headlight dimmer switch (TURN R) on	Below 1 V
  E19-8 (HAZ) - E19-7 (E)	Hazard warning switch off	9 V or higher
  	Hazard warning switch on	Below 1 V

If the result is not as specified, there may be a malfunction in the turn signal flasher.