Stop Light Switch - Installation

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - LIGHTING EXT

STOP LIGHT SWITCH - INSTALLATION

1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

Install a stop light switch mounting adjuster to the pedal support.

2. INSTALL STOP LIGHT SWITCH
Stop Light Switch - Installation. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Insert the stop light switch to the adjuster until it just touches the brake pedal.

  • NOTICE:
  • Do not depress the brake pedal.
Stop Light Switch - Installation. LIGHTING EXT. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Turn the stop light switch quarter in clockwise to install it.

  • NOTICE:
Do not depress the brake pedal.
Do not apply thrust force 98 N (9.99 kgf) or more to the switch body.
Do not apply silicone grease on the switch body.
  • Torque:
  • 1.5 N*m{ 15 kgf*cm, 13 in.*lbf}

Check the stop light switch clearance.

  • Stop light switch clearance:
  • 1.5 to 2.5 mm (0.0590 to 0.0984 in.)

Connect the wire harness clamp to the pedal support.

Connect the connector to the stop light switch.