Power Mirror Control System (W/ Retract Mirror) - How To Proceed With Troubleshooting

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - MIRROR EXT


POWER MIRROR CONTROL SYSTEM (w/ Retract Mirror) - HOW TO PROCEED WITH TROUBLESHOOTING

  • HINT:
Use the following procedures to troubleshoot the power mirror control system.
*: Use the intelligent tester.

1.VEHICLE BROUGHT TO WORKSHOP
NEXT
2.INSPECT BATTERY VOLTAGE
  • Standard voltage:
  • 11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT
3.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

Use the intelligent tester to check if the CAN communication system is functioning normally.

Result:
ResultProceed to
CAN DTC is not outputA
CAN DTC is output (for LHD)B
CAN DTC is output (for RHD)C
B.
Go to CAN COMMUNICATION SYSTEM ()
C.
Go to CAN COMMUNICATION SYSTEM ()
A
4.PROBLEM SYMPTOMS TABLE

Refer to the problem symptoms table ().

Result:
ResultProceed to
Fault is not listed in problem symptoms tableA
Fault is listed in problem symptoms tableB
B.
Go to step 7
A
5.OVERALL ANALYSIS AND TROUBLESHOOTING*

Operation Check ()

Terminals of ECU ()

Data List / Active Test ()

NEXT
6.ADJUST, REPAIR OR REPLACE
NEXT
7.CONFIRMATION TEST
NEXT
END