Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - DOOR / HATCH
POWER BACK DOOR CLOSER SWITCH - INSPECTION
| 1. INSPECT BACK DOOR CONTROL SWITCH |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 3 - 4 Pushed (on) Below 1 Ω 3 - 4 Not pushed (off) 10 kΩ or higher
If the result is not as specified, replace the back door control switch.
Apply battery voltage to the connector and check the LED illumination.
- OK:
Measurement Condition Specified Condition Battery positive (+) → terminal 2(ILL+)
Battery negative (-) → terminal 1(ILL-)Illuminates
| *a | Component without harness connected (Back Door Control Switch) |
| *b | Not pushed (off) |
| *c | Pushed (on) |