INSPECT POWER BACK DOOR MAIN SWITCH

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Switch Condition	Specified Condition
  6(MSE) - 9(MSW)	Not pushed (on)	Below 1 Ω
  6(MSE) - 9(MSW)	Pushed (off)	10 kΩ or higher

If the result is not as specified, replace the power back door main switch.

Apply battery voltage to the connector and check the LED illumination.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) → terminal 8(ILL+) Battery negative (-) → terminal 7(ILL-)	Illuminates