INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for Models with Jam Protection Function on 4 Windows)

INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (for Models with Jam Protection Function on 4 Windows)

INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for Models with Jam Protection Function on Driver Door Window Only)

INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (for Models with Jam Protection Function on Driver Door Window Only)

Apply positive (+) battery voltage to the connector terminal 2 (B).

• NOTICE:

• Do not apply positive (+) battery voltage to any terminals except terminal 2 (B) to avoid damaging the pulse sensor inside the motor.

Apply negative (-) battery voltage to the connector terminals 1 (GND) and 7 (DOWN) or 10 (UP).

Check that the motor gear rotates smoothly as follows.

• OK:

• Condition	Specified Condition
  Connect the positive (+) battery cable to terminal 2(B), and connect the negative (-) battery cable to terminal 1(GND), and keep them connected for 3 seconds or more. With terminals 2(B) and 1(GND) connected, connect the negative (-) battery cable to terminal 10(UP). Disconnect and reconnect the negative (-) battery cable to terminal 10(UP) within 1 second.	Motor gear rotates clockwise (Up)
  Connect the positive (+) battery cable to terminal 2(B), and connect the negative (-) battery cable to terminal 1(GND), and keep them connected for 3 seconds or more. With terminals 2(B) and 1(GND) connected, connect the negative (-) battery cable to terminal 7(DOWN). Disconnect and reconnect the negative (-) battery cable to terminal 7(DOWN) within 1 second.	Motor gear rotates counterclockwise (Down)

• CAUTION:

• Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly onto the door.

for Models with Jam Protection Function on 4 Windows:

Apply positive (+) battery voltage to the connector terminal 2 (B).

• NOTICE:

• Do not apply positive (+) battery voltage to any terminals except terminal 2 (B) to avoid damaging the pulse sensor inside the motor.

Apply negative (-) battery voltage to the connector terminals 1 (GND) and 7 (DOWN) or 10 (UP).

Check that the motor gear rotates smoothly as follows.

• OK:

• Measurement Condition	Specified Condition
  Connect the positive (+) battery cable to terminal 2(B), and connect the negative (-) battery cable to terminal 1(GND), and keep them connected for 3 seconds or more. With terminals 2(B) and 1(GND) connected, connect the negative (-) battery cable to terminal 10(UP). Disconnect and reconnect the negative (-) battery cable to terminal 10(UP) within 1 second.	Motor gear rotates counterclockwise (Up)
  Connect the positive (+) battery cable to terminal 2(B), and connect the negative (-) battery cable to terminal 1(GND), and keep them connected for 3 seconds or more. With terminals 2(B) and 1(GND) connected, connect the negative (-) battery cable to terminal 7(DOWN). Disconnect and reconnect the negative (-) battery cable to terminal 7(DOWN) within 1 second.	Motor gear rotates clockwise (Down)

• CAUTION:

• Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly onto the door.

Apply positive (+) battery voltage to the connector terminal 2 (B).

• NOTICE:

• Do not apply positive (+) battery voltage to any terminals except terminal 2 (B) to avoid damaging the pulse sensor inside the motor.

Apply negative (-) battery voltage to the connector terminals 1 (GND) and 7 (DOWN) or 10 (UP).

Check that the motor gear rotates smoothly as follows.

• OK:

• Condition	Specified Condition
  Connect the positive (+) battery cable to terminal 2(B), and connect the negative (-) battery cable to terminal 1(GND), and keep them connected for 3 seconds or more. With terminals 2(B) and 1(GND) connected, connect the negative (-) battery cable to terminal 10(UP). Disconnect and reconnect the negative (-) battery cable to terminal 10(UP) within 1 second.	Motor gear rotates clockwise (Up)
  Connect the positive (+) battery cable to terminal 2(B), and connect the negative (-) battery cable to terminal 1(GND), and keep them connected for 3 seconds or more. With terminals 2(B) and 1(GND) connected, connect the negative (-) battery cable to terminal 7(DOWN). Disconnect and reconnect the negative (-) battery cable to terminal 7(DOWN) within 1 second.	Motor gear rotates counterclockwise (Down)

• CAUTION:

• Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly onto the door.

Check the operation of the regulator motor.

Apply battery voltage to the regulator motor and check the operation of the regulator motor.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2	Motor gear rotates clockwise
  Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1	Motor gear rotates counterclockwise