Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - WINDOW / GLASS
FRONT PASSENGER SIDE POWER WINDOW SWITCH - INSPECTION
| 1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Models with Jam Protection Function on 4 Windows) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 6 (UP) - 1 (GND) Manual up operation Below 1 Ω 7 (DOWN) - 1 (GND) Manual down operation Below 1 Ω 8 (AUTO) - 1 (GND) Auto up/down operation Below 1 Ω
If the result is not as specified, replace the power window regulator switch assembly.
Check that the LED illuminates.
Apply battery voltage to the power window regulator switch and check that the LED illuminates.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (LED)
Battery negative (-) → 1 (GND)LED illuminates
If the result is not as specified, replace the power window regulator switch assembly.
| *1 | LED |
| *a | Component without harness connected (Power Window Regulator Switch Assembly) |
| 2. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Models with Jam Protection Function on Driver Door Window Only) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 4 (U) - 3 (B)
2 (SD) - 1 (D)UP Below 1 Ω 5 (SU) - 4 (U)
2 (SD) - 1 (D)OFF Below 1 Ω 5 (SU) - 4 (U)
3 (B) - 1 (D)DOWN Below 1 Ω
If the result is not as specified, replace the power window regulator switch assembly.
| *a | Component without harness connected (Power Window Regulator Switch Assembly) |