Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - HEATING / AIR CONDITIONING
REAR EVAPORATOR TEMPERATURE SENSOR (w/ Heater) - DISASSEMBLY
| 1. REMOVE REAR SIDE NO. 2 AIR DUCT |
Remove the 3 screws and duct.
| 2. REMOVE REAR SIDE NO. 3 AIR DUCT |
Remove the 2 screws and duct.
| 3. REMOVE DRAIN COOLER HOSE |
Remove the screw.
Detach the claw and remove the drain hose.
| 4. REMOVE REAR AIR MIX DAMPER SERVO SUB-ASSEMBLY |
Disconnect the connector.
Remove the 2 screws and damper servo.
| 5. REMOVE REAR MODE DAMPER SERVO SUB-ASSEMBLY |
Remove the 2 screws and plate cover.
Disconnect the connector.
Remove the 2 screws and damper servo.
| 6. REMOVE NO. 2 AIR MIX DAMPER SERVO SUB-ASSEMBLY |
Disconnect the connector.
Remove the 2 screws and damper servo.
| 7. REMOVE AIR CONDITIONER ACCESSORY ASSEMBLY |
Remove the packing.
Remove the bolt and 4 screws.
Using pliers, grip the claws of the clips and slide the 2 clips.
Remove the air conditioner accessory assembly.
Remove the 2 O-rings from the air conditioner accessory assembly.
| 8. REMOVE REAR COOLING UNIT EXPANSION VALVE |
Disconnect the connector.
Detach the clamp.
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and expansion valve.
| 9. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY |
Remove the screw and detach the claw.
Remove the heater clamp.
Remove the heater radiator.
| 10. REMOVE REAR BLOWER MOTOR |
Disconnect the connector.
Remove the 3 screws and blower motor.
| 11. REMOVE BLOWER MOTOR CONTROLLER |
Disconnect the connector.
Remove the 2 screws and blower motor controller.
| 12. REMOVE EVAPORATOR SUB-ASSEMBLY |
Remove the 12 screws and rear cooling unit case LH.
Remove the evaporator.
Remove the 2 O-rings from the evaporator.
| 13. REMOVE REAR EVAPORATOR TEMPERATURE SENSOR |
Detach the 2 claws and remove the sensor.
| 14. REMOVE WIRING AIR CONDITIONING HARNESS SUB-ASSEMBLY |