Check that the battery cables are connected to the correct terminals.

Install the generator bracket to the generator with the bolt.

Using SST and a press, press in a new drive end frame bearing.

Using SST, hold the center of the generator pulley with clutch and check that the outer ring turns counterclockwise and does not turn clockwise.

Using a screwdriver, remove the generator pulley cap.

Raise the front of the V-bank cover to detach the 2 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 1GR-FE BATTERY / CHARGING

Install the generator bracket to the generator with the bolt.

Using SST and a press, press in a new drive end frame bearing.

Using SST, hold the center of the generator pulley with clutch and check that the outer ring turns counterclockwise and does not turn clockwise.