Ignition Key Cylinder Light - Installation
Connect the connector.
Ignition Key Cylinder Light - Inspection
Apply battery voltage to the connector and check the LED illumination.
- OK:
Measurement Condition Specified Condition Battery positive (+) → Terminal 2 (ILL+)
Battery negative (-) → Terminal 6 (ILL-)LED illuminates
If the result is not as specified, replace the transponder key amplifier.
Ignition Key Cylinder Light - Removal
Remove the 3 screws.
Ignition Key Cylinder Light - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 LIGHTING INT
Door Courtesy Light (For Rear) - Installation
Install the bulb.
Door Courtesy Light (For Rear) - Inspection
Measure the resistance according to the value(s) in the table below.
- OK:
Measurement Condition Specified Condition Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Light illuminates
If the result is not as specified, replace the courtesy light assembly.
Door Courtesy Light (For Rear) - Removal
Detach the claw.
Door Courtesy Light (For Rear) - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 LIGHTING INT
Door Courtesy Light (For Front) - Installation
Install the bulb.
Door Courtesy Light (For Front) - Inspection
Measure the resistance according to the value(s) in the table below.
- OK:
Measurement Condition Specified Condition Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1Light illuminates
If the result is not as specified, replace the courtesy light assembly.