Dtc P0011 Camshaft Position A - Timing Over-Advanced Or System Performance (Bank 1)
Connect the intelligent tester to the DLC3.
Dtc P0335 Crankshaft Position Sensor A Circuit
The crankshaft position (CKP) sensor system consists of a crankshaft position sensor plate and a magnetic coil.
Dtc P0010 Camshaft Position A Actuator Circuit (Bank 1)
Connect the intelligent tester to the DLC3.
Sfi System - Diagnostic Trouble Code Chart
*1: Except TURKEY
*2: MIL flashes when a catalyst damaged misfire is detected.
Sfi System - Data List / Active Test
Warm up the engine.
Sfi System - Fail-Safe Chart
If any of the following DTCs are set, the ECM enters fail-safe mode to allow the vehicle to be driven temporarily.
Sfi System - Check Mode Procedure
Check and ensure the following condition:
Sfi System - Freeze Frame Data
Lexus IS250 IS220d GSE20 ALE20 4GR-FSE ENGINE CONTROL SYSTEM
Sfi System - Dtc Check / Clear
Connect an intelligent tester to the DLC3.
Sfi System - Diagnosis System
When troubleshooting Europe On-Board Diagnostic (Euro-OBD) vehicles, the vehicle must be connected to an OBD scan tool (complying with ISO 15765-4). Various data output from the vehicle's ECM can then be read.
Euro-OBD regulations require that the vehicle's on-board computer illuminates the Malfunction Indicator Lamp (MIL) on the instrument panel when the computer detects a malfunction in:
Euro-OBD regulations require that the vehicle's on-board computer illuminates the Malfunction Indicator Lamp (MIL) on the instrument panel when the computer detects a malfunction in: