When the engine switch is pushed with the electrical key in the cabin, the power source control ECU receives signals to switch the power source mode.

When the engine switch is pushed with the electrical key in the cabin, the power source control ECU receives signals to switch the power source mode.

When the engine switch is pushed with the electrical key in the cabin, the power source control ECU receives signals to switch the power source mode.

Engine start conditions or system malfunctions can be checked by the status of the engine switch indicator light.

If the engine switch is pressed with the clutch pedal depressed, the power source control ECU determines that it is an engine start request.

Check the function of the engine switch.

This DTC is output when 1) a malfunction is detected between the power source control ECU and the engine switch; or 2) either of the switches inside the engine switch is malfunctioning.

This DTC is output when there is a LIN communication problem between the power source control ECU and certification ECU or when there is a problem in the engine immobiliser system.

This DTC is output when the submersion circuit monitor inside the power source control ECU detects that the vehicle is submerged in water.

This DTC is output when the power source control ECU cannot detect the unlock condition of the steering lock within a specified time.