Use the table below to help find the cause of the problem. Check each part. If necessary, replace these parts.

Use the table below to help find the cause of the problem. Check each part. If necessary, replace these parts.

Using SST and a press, install a new needle roller bearing inner race.

Using a dial indicator and 2 V-blocks, measure the shaft runout.

• Maximum runout:
• 0.03 mm (0.0012 in.)

If the runout exceeds the maximum, replace the counter gear.

Using a feeler gauge, measure the reverse gear thrust clearance.

• Standard clearance:
• 0.12 to 0.28 mm (0.0047 to 0.0110 in.)

If the clearance is not as specified, replace the defective gear, spline piece, or bearing race.

Lexus IS250 IS220d GSE20 ALE20 RA63 MANUAL TRANSMISSION

Using SST and a press, install a new output shaft front bearing onto the output shaft.

Using a cylinder gauge, measure the inside diameter of the output shaft.

• Standard inside diameter:
• 45.009 to 45.025 mm (1.7720 to 1.7726 in.)

• Maximum inside diameter:
• 45.025 mm (1.7726 in.)

If the diameter exceeds the maximum, replace the output shaft.

Remove the No. 3 synchronizer ring from the output shaft.