Power Back Door Main Switch - Inspection
Measure the resistance according to the value(s) in the table below.
Power Back Door Main Switch - Removal
Detach the 7 claws and 4 clips, and remove the scuff plate.
Power Back Door Main Switch - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 DOOR / HATCH
Back Door Opener Switch - Installation
A bolt without a torque specification is shown in the standard bolt chart ().
Back Door Opener Switch - Inspection
Measure the resistance according to the value(s) in the table below.
Back Door Opener Switch - Removal
Remove the 2 screws.
Back Door Opener Switch - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 DOOR / HATCH
Back Door (For Double Swing Out Type) - Installation
Apply MP grease to the sliding areas of the spare wheel carrier guide roller and spare wheel carrier.
Back Door (For Double Swing Out Type) - Reassembly
Apply MP grease to the sliding areas of the door check.
Back Door (For Double Swing Out Type) - Adjustment
Check that the clearance measurements of areas A to P are within the standard ranges.
