Remove the 3 bolts and move the connector holder block so that the ECM can be removed in the next step.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 1GR-FE ENGINE CONTROL

Install a new gasket and the throttle body with motor with the 4 bolts.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  2 (M+) - 1 (M-)	20°C (68°F)	0.3 to 100 Ω

If the result is not as specified, replace the throttle body with motor assembly.

Remove the 3 bolts and screw.

Check the throttle control motor operating sounds.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 1GR-FE ENGINE CONTROL

Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  1 - 2	20°C (68°F)	6.9 to 7.9 Ω

If the result is not as specified, replace the camshaft timing oil control valve.

Raise the front of the V-bank cover to detach the 2 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.