Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE ENGINE CONTROL

Temporarily install the sensor to the exhaust pipe by hand.

Measure the resistance according to the value(s) in the table below.

()

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE ENGINE CONTROL

Install the 4 sensors with the 4 bolts so that the sensors are angled as shown in the illustration.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  1 - 2	20°C (68°F)	120 to 280 kΩ

If the result is not as specified, replace the sensor.

()

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE ENGINE CONTROL

Install a new gasket to the sensor.