Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE CONTROL
AIR FUEL RATIO SENSOR - INSTALLATION
| 1. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1) |
Temporarily install the sensor to the exhaust pipe by hand.
Using SST, tighten the sensor.
- SST
- 09224-00010
- Torque:
- without SST:
- 44 N*m{ 449 kgf*cm, 32 ft.*lbf}
- with SST:
- 40 N*m{ 408 kgf*cm, 30 ft.*lbf}
| *1 | Fulcrum Length |
- HINT:
Use a torque wrench with a fulcrum length of 300 mm (11.8 in.). If using a torque wrench with a length that is not 300 mm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification ().
Make sure SST and the wrench are connected in a straight line.
| 2. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) |
Temporarily install the sensor to the exhaust pipe by hand.
Using SST, tighten the sensor.
- SST
- 09224-00010
- Torque:
- without SST:
- 44 N*m{ 449 kgf*cm, 32 ft.*lbf}
- with SST:
- 40 N*m{ 408 kgf*cm, 30 ft.*lbf}
| *1 | Fulcrum Length |
- HINT:
Use a torque wrench with a fulcrum length of 300 mm (11.8 in.). If using a torque wrench with a length that is not 300 mm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification ().
Make sure SST and the wrench are connected in a straight line.
| 3. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY |
()