Remove the 7 clips and radiator support seal.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 HEATING / AIR CONDITIONING

When replacing the compressor and magnetic clutch with a new one, gradually discharge the refrigerant gas from the service valve, and drain the following amount of oil from the new compressor and magnetic clutch before installation.

Install the magnet clutch stator with the parts shown in the illustration matched.

Check the magnet clutch operation.

Detach the clamp.

Remove the 7 clips and radiator support seal.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 HEATING / AIR CONDITIONING

Attach the clamps to install the quick heater assembly (PTC heater assembly).

Measure the resistance according to the value(s) in the table below.