Relay - On-Vehicle Inspection
Remove the suspension control relay from the engine room relay block.
Front Acceleration Sensor - Installation
Install the sensor with the bolt.
Front Acceleration Sensor - Inspection
Connect 3 dry batteries of 1.5 V in series.
Front Acceleration Sensor - Removal
Place protective tape as shown in the illustration.
Front Acceleration Sensor - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SUSPENSION CONTROL
Suspension Control Ecu - Installation
Attach the wire harness clamp and connect the connector.
Suspension Control Ecu - Removal
Remove the tonneau cover.
Suspension Control Ecu - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SUSPENSION CONTROL
Height Control Sensor (For Rear Side) - Installation
Install the sensor with the 2 bolts and nut.
Height Control Sensor (For Rear Side) - Adjustment
Loosen the nut and adjust the link installation position by moving the height control sensor link up or down in the long hole of the bracket.