Brake Fluid - Bleeding
Turn the ignition switch to ON.
Brake Fluid - Replacement
Turn the ignition switch to ON.
Brake Fluid - On-Vehicle Inspection
Turn the ignition switch off and fully depress the brake pedal 40 times or more to release the pressure in the accumulator.
Brake Line - System Diagram
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 BRAKE SYSTEM OTHER
Brake Line - Precaution
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 BRAKE SYSTEM OTHER
Brake System - Problem Symptoms Table
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 BRAKE SYSTEM OTHER
Brake System - Precaution
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
Relay - On-Vehicle Inspection
Remove the BRK LP relay from the engine room relay block.
Crawl Switch - Installation
Attach the 4 claws to install the suspension control switch (CRAWL switch).
Crawl Switch - Inspection
Measure the resistance according to the value(s) in the table below.