CHECK BRK LP RELAY

Remove the BRK LP relay from the engine room relay block.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  3 - 4	Battery positive voltage applied to terminal 1 and battery negative voltage to terminal 2	10 kΩ or higher
  	Battery positive voltage not applied to terminal 1 and battery negative voltage applied to terminal 2	Below 1 Ω
  3 - 5	Battery positive voltage applied to terminal 1 and battery negative voltage to terminal 2	Below 1 Ω
  	Battery positive voltage not applied to terminal 1 and battery negative voltage applied to terminal 2	10 kΩ or higher

If the result is not as specified, replace the relay.

Install the BRK LP relay.