Radiator On-Vehicle Cleaning

If the fins are clogged, wash them with water or a steam cleaner and dry them with compressed air.

NOTICE:

1. To avoid damaging the fins, the injection direction should be at right angles to the core surface.
   
2. If the steam cleaner is too close to the core, there is a possibility of damaging the fins, so maintain the following injection distances.
   

   Standard Injection Distance:

   Injection Pressure	Specified Condition
   2942 to 4903 kPa (30.0 to 50.0 kgf/cm2, 427 to 711 psi)	300 mm (11.8 in.)
   4903 to 7845 kPa (50.0 to 80.0 kgf/cm2, 711 to 1138 psi)	500 mm (19.7 in.)

3. If the fins are bent, straighten them with a screwdriver or pliers.
   
4. Do not expose electronic components to water.
   

Dry the fins with compressed air.