Side Moulding (For Rear Side) -- Removal |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. REMOVE REAR QUARTER PANEL MUDGUARD LH |
Remove the 6 screws and rear quarter panel mudguard.
 |
| 2. REMOVE REAR QUARTER PANEL MUDGUARD RH |
- HINT:
- Use the same procedure described for the LH side.
| 3. REMOVE REAR BUMPER COVER |
Remove the 3 clips.
 |
Remove the 2 clips and 6 screws.
 |
Put protective tape around the rear bumper cover.
Text in Illustration *1 Protective Tape
 |
Detach the 8 claws and remove the rear bumper cover.
| 4. REMOVE REAR NO. 1 WHEEL OPENING EXTENSION LH |
Put protective tape around the rear No. 1 wheel opening extension.
Text in Illustration *1 Protective Tape
 |
Remove the 2 screws.
Detach the 6 clips and remove the rear No. 1 wheel opening extension.
Remove the 6 clips from the vehicle body.
| 5. REMOVE SIDE STEP ASSEMBLY LH |
Remove the 5 bolts, nut and side step.
 |
| 6. REMOVE REAR NO. 2 WHEEL OPENING EXTENSION LH |
Put protective tape around the rear No. 2 wheel opening extension.
Text in Illustration *1 Protective Tape
 |
Remove the retainer.
Detach the 2 clips and remove the rear No. 2 wheel opening extension.
Remove the 2 clips from the vehicle body.