Back Door Adjustment


  1. INSPECT BACK DOOR PANEL SUB-ASSEMBLY

  2. ADJUST BACK DOOR PANEL SUB-ASSEMBLY

Back Door -- Adjustment


HINT:

  1. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Engine Hood Door.Back Door.Back Door Adjustment
    Centering bolts are used to mount the door hinge to the vehicle body and door. The door cannot be adjusted with the centering bolts on. Substitute the centering bolts for standard bolts when making adjustments.
  2. A bolt without a torque specification is shown in the standard bolt chart (Toyota Fortuner RM00000118W017X.html).
Text in Illustration
*1
Centering Bolt
*2
Standard Bolt


1. INSPECT BACK DOOR PANEL SUB-ASSEMBLY


  1. Check that the clearance measurements of areas A to G are within the standard ranges.


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Engine Hood Door.Back Door.Back Door Adjustment


    Standard:

    Area
    		Specified Condition
    		Area
    		Specified Condition
    A
    		7.0 to 10.0 mm (0.276 to 0.394 in.)
    		B
    		-0.4 to 2.6 mm (-0.0157 to 0.102 in.)
    C
    		6.5 to 9.5 mm (0.256 to 0.374 in.)
    		D
    		-0.3 to 2.7 mm (-0.0118 to 0.106 in.)
    E
    		4.1 to 7.1 mm (0.161 to 0.280 in.)
    		F
    		-1.4 to 1.6 mm (-0.0551 to 0.0630 in.)
    G (Reference)
    		6.5 to 9.5 mm (0.256 to 0.374 in.)
    		-
    		-


2. ADJUST BACK DOOR PANEL SUB-ASSEMBLY


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Loosen the hinge bolts on the body.

  1. Adjust the back door panel by moving it up and down and left and right so that the clearance measurements are within the specified ranges.

  1. Tighten the hinge bolts.

    Torque:
    19 N*m{194 kgf*cm, 13 ft.*lbf}


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic-faced hammer.

  1. Tighten the striker mounting screws after the adjustment.

    Torque:
    18 N*m{178 kgf*cm, 13 ft.*lbf}