Rear Airbag Sensor On-Vehicle Inspection


  1. CHECK REAR AIRBAG SENSOR LH (VEHICLE NOT INVOLVED IN COLLISION)

  2. CHECK REAR AIRBAG SENSOR LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

  3. CHECK REAR AIRBAG SENSOR LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)

Rear Airbag Sensor -- On-Vehicle Inspection



1. CHECK REAR AIRBAG SENSOR LH (VEHICLE NOT INVOLVED IN COLLISION)

  1. Perform a diagnostic system check (Toyota Fortuner RM000000XFD06DX.html).



2. CHECK REAR AIRBAG SENSOR LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

  1. Perform a diagnostic system check (Toyota Fortuner RM000000XFD06DX.html).

  1. When the quarter panel of the vehicle or its area is damaged, check if there is any damage to the rear airbag sensor. If there are any defects as mentioned below, replace the rear airbag sensor with a new one:

    1. Cracks, dents or chips on the sensor housing.
    2. Cracks or other damage to the connector.
    3. Peeling off of the label or damage to the serial number.
    CAUTION:
    For removal and installation procedures of the rear airbag sensor, be sure to follow the correct procedure.


3. CHECK REAR AIRBAG SENSOR LH (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)

  1. When airbags have deployed as the result of a collision, be certain to replace all rear airbag sensors in the damaged area (anywhere in need of repair). Furthermore, it is also necessary to replace any rear airbag sensor in undamaged areas that have registered a major collision, or which exhibit any of the following abnormalities:

    1. Cracks, dents or chips on the sensor housing.
    2. Cracks or other damage to the connector.
    3. Peeling off of the label or damage to the serial number.
    CAUTION:
    For removal and installation procedures of the rear airbag sensor, be sure to follow the correct procedure.