PERFORM ACTIVE TEST USING INTELLIGENT TESTER (ABS WARNING LIGHT)
VEHICLE STABILITY CONTROL SYSTEM - ABS Warning Light does not Come ON |
WIRING DIAGRAM
Refer to ABS Warning Light Remains ON (Toyota Fortuner RM000003O4G007X_02.html).INSPECTION PROCEDURE
- NOTICE:
- When replacing the brake actuator assembly, perform zero point calibration (Toyota Fortuner RM000000XHR02TX.html).
| 1.CHECK ABS WARNING LIGHT |
Disconnect the skid control ECU connector.
Turn the ignition switch to on.
Check that the ABS warning light comes on.
- OK:
- The ABS warning light comes on.
|
| ||||
| OK | ||
| ||
| 2.PERFORM ACTIVE TEST USING INTELLIGENT TESTER (ABS WARNING LIGHT) |
Perform the Active Test of the skid control ECU using the intelligent tester (Toyota Fortuner RM000000XHW080X.html).
Check the Data List.
- OK:
- "ABS Warning Light" in the Data List changes between ON and OFF when the ON/OFF operation of "ABS Warning Light" in the Active Test is performed.
|
| ||||
| OK | ||
| ||