Front Power Seat Motor Assembly (For Reclining) Installation

Temporarily install the power seat motor with the 3 bolts.

Install the reclining rod.

Attach the 6 claws to install the push nut to the reclining rod.

Using a 4 mm socket hexagon wrench, tighten the 3 bolts.

Torque:

4.5 N*m{46 kgf*cm, 40 in.*lbf}

Attach the 8 hooks to install the seatback spring.

Connect the connector.

Attach the guide to install the reclining adjuster inside cover.

Install the screw.

Attach the claw to install the reclining adjuster inside cover.

Install the screw.

Install the seatback cloth.

Install the seatback pad.

Using hog ring pliers, attach the strap of the seatback cover to the seatback pad with new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Attach the 4 claws to install the 2 headrest supports.

Using hog ring pliers, install the upper part of the seatback cover to the seatback pad with new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Using hog ring pliers, install the center of the seatback cover to the seatback pad with new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

w/ Front Seat Side Airbag:

Torque:

5.5 N*m{56 kgf*cm, 49 in.*lbf}

Using hog ring pliers, attach the strap of the seatback cover to the seatback frame with new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Using hog ring pliers, attach the bottom of the seatback cloth to the seatback frame with new hog rings.

Using hog ring pliers, attach the wires at the bottom of the seatback cover with new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Pass the wire harness of the front seat inner belt assembly below the claw and into the front seat cushion inner shield.

Attach the claw to temporarily install the cushion inner shield.

NOTICE:

Make sure that the wire harness of the front seat inner belt assembly is not being pinched inside the front seat cushion inner shield.

Attach the guide and claw.

NOTICE:

Make sure that the wire harness of the front seat inner belt assembly is not being pinched inside the front seat cushion inner shield.

Install the screw to the cushion inner shield.

Attach the claw and guide to install the cushion shield.

Install the 3 screws.

Install the 2 screws.

Attach the 4 claws to install the knob.

Attach the 2 claws to install the knob.

Install the front seat assembly (Toyota Fortuner RM000003NZV009X.html).

Check the SRS warning light (Toyota Fortuner RM000000XFD06DX.html).

Check the power seat operation (Toyota Fortuner RM000003REB000X.html).