Front Seat Assembly (For Power Seat) -- Installation |
| 1. INSTALL FRONT SEAT ASSEMBLY |
Place the front seat assembly in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Connect the seat wire connector under the seat.
w/ Front Seat Side Airbag:
Connect the airbag connector.- NOTICE:
- Be careful not to damage the airbag wire harness or connector.
Temporarily install the front seat assembly with the 4 bolts.
w/ Front Seat Side Airbag:
Connect the cable to the negative (-) battery terminal.- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000002HD2006X.html).
Operate the power seat switch (slide switch) to move the seat to the rearmost position.
Tighten the bolts in the order shown in the illustration.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
 |
Operate the power seat switch (slide switch) to move the seat to the foremost position.
Tighten the bolts in the order shown in the illustration.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
 |
| 2. INSTALL OUTER SEAT TRACK BRACKET COVER |
Attach the 2 claws in the order shown in the illustration to install the cover.
 |
| 3. INSTALL INNER SEAT TRACK BRACKET COVER |
Attach the 2 claws in the order shown in the illustration to install the cover.
 |
| 4. INSTALL FRONT SEAT HEADREST ASSEMBLY |
Install the front seat headrest.
| 5. CHECK SRS WARNING LIGHT (w/ Front Seat Side Airbag) |
Check the SRS warning light (Toyota Fortuner RM000000XFD06DX.html).
| 6. INSPECT FRONT SEAT ASSEMBLY |
Check the power seat operation (Toyota Fortuner RM000003REB000X.html).