Security Indicator Light Assembly Inspection


  1. INSPECT SECURITY INDICATOR LIGHT ASSEMBLY

Security Indicator Light Assembly -- Inspection



1. INSPECT SECURITY INDICATOR LIGHT ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Apply battery voltage between the terminals of the security indicator light, and check the illumination of the security indicator light.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 2
    Battery negative (-) → Terminal 1
    		Illuminates
    NOTICE:
    1. If the positive (+) lead and the negative (-) lead are incorrectly connected, the security indicator light will not illuminate.
    2. If the voltage is too low, the security indicator light will not illuminate.
    If the result is not as specified, replace the light assembly.