Engine Hood Courtesy Switch Inspection

INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)

Engine Hood Courtesy Switch -- Inspection

1. INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)

for LHD:
1. Measure the resistance of according to the value(s) in the table below.
  Standard Resistance:
  Tester Connection
  Switch Condition
  Specified Condition
  1 - 2
  Unlock position
  Below 1 Ω
  1 - 2
  Lock position
  10 kΩ or higher
  If the result is not as specified, replace the hood lock assembly.
  Text in Illustration
  *a
  Component without harness connected
  (Hood Lock Assembly)
  *b
  Unlock Position
  *c
  Lock Position

for RHD:
1. Measure the resistance of according to the value(s) in the table below.
  Standard Resistance:
  Tester Connection
  Switch Condition
  Specified Condition
  1 - 2
  Unlock position
  Below 1 Ω
  1 - 2
  Lock position
  10 kΩ or higher
  If the result is not as specified, replace the hood lock assembly.
  Text in Illustration
  *a
  Component without harness connected
  (Hood Lock Assembly)
  *b
  Unlock Position
  *c
  Lock Position