Theft Deterrent System Rear Door Courtesy Switch Rh Circuit
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY RH
CHECK HARNESS AND CONNECTOR (REAR DOOR COURTESY LIGHT SWITCH RH - THEFT WARNING ECU)
THEFT DETERRENT SYSTEM - Rear Door Courtesy Switch RH Circuit |
DESCRIPTION
The theft warning ECU assembly detects the condition of the rear door courtesy light switch assembly RH.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.INSPECT REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY RH |
Remove the rear door courtesy light switch assembly RH (Toyota Fortuner RM00000113Z002X.html).
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
1 - Body ground
| Not pushed (ON)
| Below 1 Ω
|
Pushed (OFF)
| 10 kΩ or higher
|
Text in Illustration*a
| Not pushed (ON)
|
*b
| Pushed (OFF)
|
*c
| Body ground
|
| 2.CHECK HARNESS AND CONNECTOR (REAR DOOR COURTESY LIGHT SWITCH RH - THEFT WARNING ECU) |
Disconnect the D7 rear door courtesy light switch assembly RH connector.
Disconnect the T36 theft warning ECU assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
D7-1 - T36-7 (CTY)
| Always
| Below 1 Ω
|
D7-1 or T36-7 (CTY) - Body ground
| Always
| Below 1 Ω
|
| | REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
