Theft Deterrent System Front Passenger Side Door Courtesy Switch Circuit
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (FOR FRONT PASSENGER SIDE)
CHECK WIRE HARNESS (FRONT DOOR COURTESY LIGHT SWITCH [FOR FRONT PASSENGER SIDE] - THEFT WARNING ECU)
THEFT DETERRENT SYSTEM - Front Passenger Side Door Courtesy Switch Circuit |
DESCRIPTION
The theft warning ECU assembly detects the condition of the front door courtesy light switch assembly (for Front Passenger Side).
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (FOR FRONT PASSENGER SIDE) |
Remove the front door courtesy light switch assembly (for Front Passenger Side) (Toyota Fortuner RM00000113X002X.html).
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Switch Condition
| Specified Condition
|
1 - Body ground
| Not pushed (ON)
| Below 1 Ω
|
1 - Body ground
| Pushed (OFF)
| 10 kΩ or higher
|
Text in Illustration*a
| Not pushed (ON)
|
*b
| Pushed (OFF)
|
*c
| Body ground
|
| 2.CHECK WIRE HARNESS (FRONT DOOR COURTESY LIGHT SWITCH [FOR FRONT PASSENGER SIDE] - THEFT WARNING ECU) |
Disconnect the D5 front door courtesy light switch assembly (for Front Passenger Side) connector.
Disconnect the T36 theft warning ECU assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
D5-1 - T36-7 (CTY)
| Always
| Below 1 Ω
|
D5-1 or T36-7 (CTY) - Body ground
| Always
| 10 kΩ or higher
|
| | REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
