Radiator -- Disassembly |
| 1. REMOVE RADIATOR BRACKET SUB-ASSEMBLY |
Remove the 4 bolts and 2 brackets.
 |
| 2. REMOVE RADIATOR DRAIN COCK PLUG |
Remove the drain cock plug.
Remove the O-ring.
| 3. ASSEMBLE SST |
Install the claw to part A of the overhaul handle as shown in the illustration.
- SST
- 09230-01010(09231-01010,09231-01030)
 |
While squeezing the handle, adjust the stopper bolt so that dimension B is as specified below.
- Dimension B:
- 0.2 to 0.3 mm (0.008 to 0.012 in.)
- NOTICE:
- If this adjustment is not performed, the claw will be damaged.
| 4. UNCAULK LOCK PLATE |
Using SST to release the caulking, squeeze the handle until stopped by the stopper bolt.
- SST
- 09230-01010(09231-01010,09231-01030)
 |
| 5. REMOVE RADIATOR TANK UPPER AND TANK LOWER |
Lightly tap the bracket of the radiator (or radiator hose inlet or outlet) with a plastic-faced hammer and remove the tank.
 |
Remove the O-ring.