Power Door Lock Control System (W/ Theft Deterrent System) Customize Parameters

  1. CUSTOMIZE METHOD FLOWCHART OF SPEED-SENSITIVE AUTOMATIC DOOR LOCK FUNCTION AND IGNITION SWITCH-LINKED AUTOMATIC DOOR UNLOCK FUNCTION

  1. KEY IS NOT INSERTED INTO IGNITION KEY CYLINDER

  2. INSERT KEY AND PULL OUT KEY. REPEAT ONCE WITHIN 5 SECONDS

  3. PRESS AND HOLD DOWN BOTH LOCK AND UNLOCK SWITCH

  4. PERFORM LOCK OPERATION

  5. PERFORM UNLOCK OPERATION

  6. SELECT CUSTOMIZE MODE SETTING

  7. CHECK CURRENT SETTING

  8. TURN FUNCTION AND SETTING ON

  9. TURN FUNCTION AND SETTING OFF

  10. END CUSTOMIZE MODE

  1. CUSTOMIZE METHOD FLOWCHART OF 2 STEP UNLOCK OPERATION

  1. KEY IS NOT INSERTED INTO IGNITION KEY CYLINDER

  2. INSERT KEY AND PULL OUT KEY. REPEAT ONCE WITHIN 5 SECONDS

  3. PRESS AND HOLD DOWN BOTH LOCK AND UNLOCK SWITCH

  4. PERFORM LOCK OPERATION

  5. PERFORM UNLOCK OPERATION

  6. SELECT CUSTOMIZE MODE SETTING

  7. CHECK CURRENT SETTING

  8. TURN ON 2 STEP UNLOCK FUNCTION

  9. TURN OFF 2 STEP UNLOCK FUNCTION

  10. END CUSTOMIZE MODE

Power Door Lock Control System (W/ Theft Deterrent System) -- Customize Parameters


HINT:
The following items can be customized.
NOTICE:
  1. When the customer requests a change in a function, first make sure that the function(s) can be customized.
  1. Be sure to write down the current settings before customizing.
  2. When troubleshooting a function, first make sure that the function is set to the default setting.

Theft warning ECU
Item
Default
Contents
Setting
Speed-sensitive automatic door lock function
ON
Function that locks all doors once when vehicle speed reaches 25 km/h (16 mph)
ON/OFF*
Ignition switch-linked automatic door unlock function
ON
After speed-sensitive automatic door lock function operates, turning ignition switch OFF causes doors to automatically unlock
ON/OFF*
2-step unlock function
ON
  1. Driver side door can be unlocked by pressing transmitter's unlock switch once; remaining doors can be unlocked by pressing transmitter's unlock switch a second time.
  1. Driver side door can be unlocked by turning door key cylinder once; remaining doors can be unlocked by turning door key cylinder a second time.
ON/OFF
HINT:
*: When customizing the ON/OFF setting of the speed-sensitive automatic door lock function or ignition switch-linked automatic door unlock function, note that the two functions' settings are synchronized. For information on how to customize, refer to the flowchart below.

CUSTOMIZE METHOD FLOWCHART OF SPEED-SENSITIVE AUTOMATIC DOOR LOCK FUNCTION AND IGNITION SWITCH-LINKED AUTOMATIC DOOR UNLOCK FUNCTION
  1. During customize mode, the alarm control functions are disabled.
  1. During customize mode, the following wireless control functions are disabled: remote alarm function, automatic locking function, operation stop function and illuminated entry function.
  1. In the flowchart, "lock operation" and "unlock operation" refer to the wireless transmitter lock operation and unlock operation.
  1. During customize mode, the theft warning ECU will not output lock/unlock signals.
  1. At any time during customize mode, inserting the key into the ignition key cylinder will end customize mode.


1.KEY IS NOT INSERTED INTO IGNITION KEY CYLINDER

    NEXT


    2.INSERT KEY AND PULL OUT KEY. REPEAT ONCE WITHIN 5 SECONDS

      NEXT


      3.PRESS AND HOLD DOWN BOTH LOCK AND UNLOCK SWITCH

      1. Press and hold down both lock and unlock switches on the transmitter for over 3 seconds.

        NOTICE:
        Perform this procedure within 5 to 10 seconds of completing the previous step.
        HINT:
        When customize mode has been entered, the hazard warning lights will immediately flash once.

      NEXT


      4.PERFORM LOCK OPERATION

      1. Perform the lock operation 2 times within 2 seconds.

        NOTICE:
        Perform this procedure within 5 seconds of completing the previous step.
        HINT:
        If the lock operation is performed over 5 times or the unlock switch is pressed, customize mode will end.

      NEXT


      5.PERFORM UNLOCK OPERATION

      1. Perform the unlock operation once.

        NOTICE:
        Perform this procedure within 2 seconds of performing the last lock operation of the previous step.
        HINT:
        1. After the hazard warning lights flash 2 times, the user can confirm the customize setting, customize the setting, or end customize mode.
        1. A selection must be made within 10 seconds.

      NEXT


      6.SELECT CUSTOMIZE MODE SETTING

        Item
        		Proceed to
        Check current setting
        		A
        Turn ON speed-sensitive automatic door lock function and ignition switch-linked automatic door unlock function setting
        		B
        Turn OFF speed-sensitive automatic door lock function and ignition switch-linked automatic door unlock function setting
        		C
        End customize mode
        		D


      		B.
      Go to step 8

      		C.
      Go to step 9

      		D.
      Go to step 10
      A


      7.CHECK CURRENT SETTING

      1. Perform the unlock operation once.

        2. Result
        Result
        		Setting
        Hazard warning lights flash once
        		ON
        Hazard warning lights flash twice
        		OFF
        HINT:
        The current customize setting is communicated through hazard warning light flashes.

      NEXT

      END


      8.TURN FUNCTION AND SETTING ON

      1. Perform the lock operation once. Then perform the unlock operation again within 2 seconds

        HINT:
        The hazard warning lights will flash once.

      NEXT

      END


      9.TURN FUNCTION AND SETTING OFF

      1. Perform the lock operation twice. Then perform the unlock operation again within 2 seconds.

        HINT:
        The hazard warning lights flash twice.

      NEXT

      END


      10.END CUSTOMIZE MODE

      1. Perform the lock operation 3 times.


      NEXT

      END


      CUSTOMIZE METHOD FLOWCHART OF 2 STEP UNLOCK OPERATION


      1.KEY IS NOT INSERTED INTO IGNITION KEY CYLINDER

        NEXT


        2.INSERT KEY AND PULL OUT KEY. REPEAT ONCE WITHIN 5 SECONDS

          NEXT


          3.PRESS AND HOLD DOWN BOTH LOCK AND UNLOCK SWITCH

          1. Press and hold down both lock and unlock switches on the transmitter for over 3 seconds.

            NOTICE:
            Perform this procedure within 5 to 10 seconds of completing the previous step.
            HINT:
            When customize mode has been entered, the hazard warning lights will immediately flash once.

          NEXT


          4.PERFORM LOCK OPERATION

          1. Perform the lock operation 2 times within 2 seconds.

            NOTICE:
            Perform this procedure within 5 seconds of completing the previous step.
            HINT:
            If the lock operation is performed over 5 times or the unlock switch is pressed, customize mode will end.

          NEXT


          5.PERFORM UNLOCK OPERATION

          1. Perform the unlock operation once.

            NOTICE:
            Perform this procedure within 2 seconds of performing the last lock operation of the previous step.
            HINT:
            1. After the hazard warning lights flash 2 times, the user can confirm the customize setting, customize the setting, or end customize mode.
            1. A selection must be made within 10 seconds.

          NEXT


          6.SELECT CUSTOMIZE MODE SETTING

            Item
            		Proceed to
            Check current setting
            		A
            Turn on 2 step unlock function
            		B
            Turn off 2 step unlock function
            		C
            End customize mode
            		D


          		B.
          Go to step 8

          		C.
          Go to step 9

          		D.
          Go to step 10
          A


          7.CHECK CURRENT SETTING

          1. Perform the unlock operation once.

            2. Result
            		Setting
            Hazard warning lights flash once
            		ON
            Hazard warning lights flash twice
            		OFF
            HINT:
            The current customize setting is communicated through hazard warning light flashes.

          NEXT

          END


          8.TURN ON 2 STEP UNLOCK FUNCTION

          1. Perform the lock operation once. Then perform the unlock operation again within 2 seconds.

            HINT:
            The hazard warning lights will flash once.

          NEXT

          END


          9.TURN OFF 2 STEP UNLOCK FUNCTION

          1. Perform the lock operation twice. Then perform the unlock operation again within 2 seconds.

            HINT:
            The hazard warning lights will flash twice.

          NEXT

          END


          10.END CUSTOMIZE MODE

          1. Perform the lock operation 3 times.


          NEXT

          END