Fog Light Assembly Removal
REMOVE RADIATOR GRILLE
REMOVE FRONT NO. 1 WHEEL OPENING EXTENSION PAD
REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
REMOVE ENGINE SIDE COVER SUB-ASSEMBLY LH
REMOVE ENGINE SIDE COVER SUB-ASSEMBLY RH
REMOVE FRONT BUMPER COVER
REMOVE FOG LIGHT ASSEMBLY LH
Fog Light Assembly -- Removal |
- HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
| 1. REMOVE RADIATOR GRILLE |
Remove the 2 screws.
Using a clip remover, remove the 2 clips.
Detach the 6 claws and remove the radiator grille.
| 2. REMOVE FRONT NO. 1 WHEEL OPENING EXTENSION PAD |
- HINT:
- Use the same procedures to remove the extension pad on the other side.
Remove the 2 screws and extension pad.
| 3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH |
Remove the 4 screws.
Using a clip remover, remove the 3 clips.
Partially remove the splash shield.
- HINT:
- It is not necessary to fully remove the splash shield. Partially remove it so that the bumper cover can be removed in a later step.
| 4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH |
- HINT:
- Use the same procedures described for the LH side.
| 5. REMOVE ENGINE SIDE COVER SUB-ASSEMBLY LH |
Using a clip remover, remove the 2 clips.
Remove the 3 bolts and engine side cover.
| 6. REMOVE ENGINE SIDE COVER SUB-ASSEMBLY RH |
- HINT:
- Use the same procedures described for the LH side.
| 7. REMOVE FRONT BUMPER COVER |
Using a clip remover, remove the 7 clips.
Put protective tape around the bumper cover.
Detach the 8 claws and remove the bumper cover.
w/ Fog Light:
Disconnect the 2 fog light connectors.
| 8. REMOVE FOG LIGHT ASSEMBLY LH |
Disconnect the connector.
Remove the 3 bolts and fog light.
