Rear Blower Motor Removal


  1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE QUARTER INSIDE TRIM BOARD RH

  4. REMOVE QUARTER PILLAR GARNISH RH

  5. REMOVE NO. 1 COOLER AIR DUCT

  6. REMOVE REAR BUMPER PLATE

  7. REMOVE QUARTER VENT DUCT ASSEMBLY RH

  8. REMOVE NO. 1 COOLER COVER

  9. DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

  10. REMOVE COOLING (REAR) UNIT ASSEMBLY

  11. REMOVE BLOWER MOTOR

Rear Blower Motor -- Removal



1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM

  1. Start up the engine.

  1. Turn the A/C switch ON.

  1. Operate the cooler compressor with an engine speed of approximately 1,000 rpm for 5 to 6 minutes to circulate the refrigerant and collect the compressor oil remaining in each component into the cooler compressor.

  1. Stop the engine.

  1. Using SST, discharge the refrigerant gas.

    SST
    09985-20010(09985-02130,09985-02150,09985-02090,09985-02110,09985-02010,09985-02050,09985-02060,09985-02070)


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Toyota Fortuner RM000002HD2006X.html).


3. REMOVE QUARTER INSIDE TRIM BOARD RH


4. REMOVE QUARTER PILLAR GARNISH RH


5. REMOVE NO. 1 COOLER AIR DUCT


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the 3 screws and air duct.



6. REMOVE REAR BUMPER PLATE


7. REMOVE QUARTER VENT DUCT ASSEMBLY RH


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Air Conditioning.Rear Blower Motor.Rear Blower Motor Removal

  1. Detach the 5 claws and remove the duct.



8. REMOVE NO. 1 COOLER COVER


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Air Conditioning.Rear Blower Motor.Rear Blower Motor Removal

  1. Remove the packing.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Air Conditioning.Rear Blower Motor.Rear Blower Motor Removal

  1. Remove the 2 bolts and disconnect the cooler cover.



9. DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Air Conditioning.Rear Blower Motor.Rear Blower Motor Removal

  1. Remove the 2 bolts.

  1. Disconnect the air conditioner tube and accessory assembly.

    NOTICE:
    1. Do not use a screwdriver or similar tool to disconnect the tube.
    2. Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  1. Remove the 2 O-rings from the air conditioner tube and accessory assembly.



10. REMOVE COOLING (REAR) UNIT ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the bolt and body ground.

  1. Detach the 4 clamps.

  1. Disconnect the 4 connectors.

  1. Remove the 3 bolts and cooling unit.



11. REMOVE BLOWER MOTOR


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Air Conditioning.Rear Blower Motor.Rear Blower Motor Removal

  1. Remove the 3 screws and cover.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Air Conditioning.Rear Blower Motor.Rear Blower Motor Removal

  1. Remove the 9 screws.

  1. Detach the 3 claws and remove the cooling unit cover.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the nut and fan.



    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Remove the screw and blower motor.