Rear Blower Motor -- Installation |
| 1. INSTALL REAR BLOWER MOTOR WITH FAN SUB-ASSEMBLY |
Install the rear blower motor with fan sub-assembly with the 3 screws.
Connect the connector.
| 2. INSTALL QUARTER INSIDE TRIM BOARD RH |
Detach the 8 claws and 10 clips to install the quarter inside trim board.
Install the clip.
Connect the rear No. 2 seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Connect the rear No. 1 seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Attach the 2 claws to install the outer lap belt anchor cover.
- HINT:
- Use the same procedure for both outer lap belt anchor covers.
| 3. INSTALL QUARTER TRIM HOOK |
- HINT:
- Use the same procedure for both quarter trim hooks.
Install the quarter trim hook with the screw.
| 4. INSTALL BACK DOOR SCUFF PLATE |
Attach the 4 claws, 2 guides and 6 clips to install the back door scuff plate.
| 5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
- HINT:
- Use the same procedure described for the LH side.
| 6. INSTALL REAR DOOR SCUFF PLATE RH |
- HINT:
- Use the same procedure described for the LH side.
| 7. INSTALL REAR NO. 2 SEAT ASSEMBLY |