Rear Upper Control Arm Installation


  1. INSTALL UPPER CONTROL ARM ASSEMBLY

  2. INSTALL REAR WHEEL

  3. STABILIZE SUSPENSION

  4. TIGHTEN UPPER CONTROL ARM ASSEMBLY

Rear Upper Control Arm -- Installation


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.
  3. A bolt without a torque specification is shown in the standard bolt chart (Toyota Fortuner RM00000118W017X.html).


1. INSTALL UPPER CONTROL ARM ASSEMBLY

  1. Temporarily install the control arm with the 2 bolts and 2 nuts.



2. INSTALL REAR WHEEL
Torque:
105 N*m{1,071 kgf*cm, 77 ft.*lbf}


3. STABILIZE SUSPENSION

  1. Lower the vehicle.

  1. Press down on the vehicle several time to stabilize the suspension.



4. TIGHTEN UPPER CONTROL ARM ASSEMBLY

  1. Tighten the 2 bolts.

    Torque:
    145 N*m{1,479 kgf*cm, 107 ft.*lbf}
    HINT:
    While fixing the nut in place, tighten the bolts.