Toyota Fortuner. Rear Seat Inner Belt Assembly Installation

Rear Seat Inner Belt Assembly -- Installation

A bolt without a torque specification is shown in the standard bolt chart (Toyota Fortuner RM00000118W017X.html).

1. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY RH

Install the seat belt with the nut as shown in the illustration.
Torque:
42 N*m{428 kgf*cm, 31 ft.*lbf}
NOTICE:
Do not overlap the anchor part of the seat belt and the protruding parts of the floor panel.

2. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY LH

Install the seat belt with the nut as shown in the illustration.
Torque:
42 N*m{428 kgf*cm, 31 ft.*lbf}
NOTICE:
Do not overlap the anchor part of the seat belt and the protruding parts of the floor panel.

3. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY INNER LH

Install the seat belt with the bolt.
Torque:
42 N*m{428 kgf*cm, 31 ft.*lbf}
NOTICE:
The anchor part of the seat belt must not overlap the protruding part.

4. INSTALL REAR NO. 1 SEAT RECLINING COVER LH

5. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY LH

Install the seat belt LH with the bolt.
Torque:
42 N*m{428 kgf*cm, 31 ft.*lbf}
NOTICE:
Do not overlap the anchor part of the seat belt and protruding parts of the seat.

6. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY CENTER

Install the seat belt center with the bolt.
Torque:
42 N*m{428 kgf*cm, 31 ft.*lbf}
NOTICE:
Do not overlap the anchor part of the seat belt and protruding parts of the seat.

7. INSTALL REAR NO. 1 SEAT CUSHION COVER RH

Using hog ring pliers, install the seat cushion cover to the seat cushion pad with 4 new hog rings.
NOTICE:
1. Be careful not to damage the cover.
2. When installing the hog rings, avoid wrinkling the cover.

Install the seat cushion cover (with pad) to the seat cushion frame.
HINT:
Make sure that the seat stopper band is not inside the cushion cover.

8. INSTALL REAR NO. 1 SEAT RECLINING COVER RH

9. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH

Install the release handle to the rear seat lock through the hole in the rear seat cushion under cover.

10. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY INNER RH

Install the seat belt with the bolt.
Torque:
42 N*m{428 kgf*cm, 31 ft.*lbf}
NOTICE:
Do not overlap the anchor part of the seat belt and protruding parts of the seat.

11. INSTALL REAR NO. 1 SEAT RECLINING COVER LH