Rear No. 2 Seat Assembly Removal


  1. REMOVE REAR SEAT FRONT BRACKET COVER RH

  2. REMOVE REAR SEAT REAR BRACKET COVER RH

  3. REMOVE REAR NO. 2 SEAT ASSEMBLY

  4. REMOVE REAR SEAT LOCK STRIKER

Rear No. 2 Seat Assembly -- Removal


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the RH side.


1. REMOVE REAR SEAT FRONT BRACKET COVER RH


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Seat.Rear No. 2 Seat Assembly.Rear No. 2 Seat Assembly Removal

  1. Fully tilt the seatback forward.

  1. Remove the screw.

  1. Pull the bracket cover in the direction indicated by the arrow in the illustration to detach the claw and remove the bracket cover.



2. REMOVE REAR SEAT REAR BRACKET COVER RH
HINT:
Use the same procedures described for the rear seat front bracket cover RH.


3. REMOVE REAR NO. 2 SEAT ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Seat.Rear No. 2 Seat Assembly.Rear No. 2 Seat Assembly Removal

  1. Remove the 2 bolts.

  1. Unlock the seat legs by horizontally pulling the release band. Then remove the seat.

    NOTICE:
    Be careful not to damage the vehicle body,


4. REMOVE REAR SEAT LOCK STRIKER

  1. Partially remove the floor carpet.

  1. Remove the 4 bolts and 2 lock strikers.