Rear No. 2 Seat Assembly -- Installation |
- HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the RH side.
| 1. INSTALL REAR SEAT LOCK STRIKER |
Install the 2 lock strikers with the 4 bolts.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
Install the floor carpet.
| 2. INSTALL REAR NO. 2 SEAT ASSEMBLY |
Fully tilt the seatback forward.
Place the seat onto the lock striker.
- NOTICE:
- Be careful not to damage the vehicle body.
 |
Tighten the bolt on the rear side of the seat.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
Tighten the bolt on the front side of the seat.
- Torque:
- 37 N*m{377 kgf*cm, 27 ft.*lbf}
Fully lock the seat to the lock striker.
- HINT:
- Confirm that the seat is firmly locked to the lock striker.
| 3. INSTALL REAR SEAT FRONT BRACKET COVER RH |
 |
Attach the hook to install the bracket cover.
Install the screw.
| 4. INSTALL REAR SEAT REAR BRACKET COVER RH |
Attach the hook to install the bracket cover.
Install the screw.
Return the seatback to the upright position.