Outer Mirror Switch Inspection


  1. INSPECT OUTER MIRROR SWITCH ASSEMBLY

Outer Mirror Switch -- Inspection



1. INSPECT OUTER MIRROR SWITCH ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Mirror.Outer Mirror Switch.Outer Mirror Switch Inspection

  1. Inspect the outer mirror switch.

    1. Select "L" on the select switch.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      4 (MLV) - 8 (B)
      6 (M+) - 7 (E)
      		UP
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      4 (MLV) - 7 (E)
      6 (M+) - 8 (B)
      		DOWN
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      5 (MLH) - 8 (B)
      6 (M+) - 7 (E)
      		LEFT
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      5 (MLH) - 7 (E)
      6 (M+) - 8 (B)
      		RIGHT
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      If the result is not as specified, replace the outer mirror switch assembly.

    3. Select "R" on the select switch.

    4. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      3 (MRV) - 8 (B)
      6 (M+) - 7 (E)
      		UP
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      3 (MRV) - 7 (E)
      6 (M+) - 8 (B)
      		DOWN
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      2 (MRH) - 8 (B)
      6 (M+) - 7 (E)
      		LEFT
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      2 (MRH) - 7 (E)
      6 (M+) - 8 (B)
      		RIGHT
      		Pressed
      		Below 1 Ω
      Not pressed
      		10 kΩ or higher
      If the result is not as specified, replace the outer mirror switch assembly.

  1. Inspect the retract switch.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      7 (E) - 10 (MF)
      8 (B) - 9 (MR)
      		Pushed in
      		Below 1 Ω
      7 (E) - 9 (MR)
      8 (B) - 10 (MF)
      		Not pushed in
      		Below 1 Ω
      If the result is not as specified, replace the outer mirror switch assembly.
      Text in Illustration
      *1
      		Retract Switch
      *2
      		Select Switch
      *a
      		Component without harness connected
      (Outer Mirror Switch Assembly)