Cruise Control Main Switch Installation


  1. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY

  2. INSTALL STEERING WHEEL ASSEMBLY

  3. INSTALL STEERING PAD ASSEMBLY

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  5. CHECK SRS WARNING LIGHT

Cruise Control Main Switch -- Installation



1. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Install the switch with the 3 screws.

    Torque:
    0.84 N*m{8.5 kgf*cm, 7.4 in.*lbf}


2. INSTALL STEERING WHEEL ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Cruise Control.Cruise Control Main Switch.Cruise Control Main Switch Installation

  1. Align the matchmarks on the steering wheel and main shaft.

  1. Install the steering set nut.

    Torque:
    50 N*m{510 kgf*cm, 37 ft.*lbf}


3. INSTALL STEERING PAD ASSEMBLY


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

  1. Support the steering pad with one hand as shown in the illustration.

  1. Connect the airbag connector.

    NOTICE:
    When handling the airbag connector, do not damage the airbag wire harness.

  1. Connect the horn connector.

  1. Install the steering pad after confirming that the circumference grooves of the screws are caught on the screw case.

  1. Using a T30 "torx" socket, install the 2 screws.

    Torque:
    8.8 N*m{90 kgf*cm, 78 in.*lbf}


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


5. CHECK SRS WARNING LIGHT

  1. Check the SRS warning light (Toyota Fortuner RM000000YVX004X.html).