Outer Rear View Mirror Installation
INSTALL OUTER MIRROR COVER LH
INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH
INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH
Outer Rear View Mirror -- Installation |
- HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.
1. INSTALL OUTER MIRROR COVER LH |
Install the mirror cover as shown in the illustration.
After installing the outer mirror cover, check that there is no gap between the cover and mirror body.
- HINT:
- If there is a gap between the cover and body, noise will occur during driving.
Install the mirror as shown in the illustration.
2. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH |
Install the mirror with the 3 nuts.
- Torque:
- 8.0 N*m{82 kgf*cm, 71 ft.*lbf}
Connect the connector labeled A.
3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
Attach the 7 claws to install the weatherstrip inner.
Install the trim board.
Attach the 8 clips to install the trim board.
Install the screw and clip.
4. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH |
Attach the 2 clips to install the garnish.