Power Point Socket -- Installation |
| 1. INSTALL REAR POWER POINT SOCKET ASSEMBLY |
 |
Attach the 2 claw fittings to install the socket.
| 2. INSTALL QUARTER INSIDE TRIM BOARD LH |
Install the 2 belt hangers to the trim board.
Connect the power point socket connector.
Attach the 10 clips and 6 claws to install the trim board.
 |
Install the clip labeled A.
Install the quarter trim hook with the screw.
Connect the rear No. 1 seat belt outer anchor.
Connect the anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Attach the 2 claws to install the lap belt outer anchor cover.
Connect the rear No. 2 seat belt outer anchor.
Connect the anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Attach the 2 claws to install the lap belt outer anchor cover.
| 3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 4. INSTALL REAR DOOR SCUFF PLATE LH |
Attach the 2 clips and 7 claws to install the scuff plate.
 |
| 5. INSTALL BACK DOOR SCUFF PLATE |
Attach the 6 clips and 4 claws to install the scuff plate.
 |
| 6. INSTALL POWER POINT SOCKET ASSEMBLY |
 |
Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the cover.
| 7. INSTALL SWITCH BASE |
 |
Connect all connectors.
Attach the 8 claws to install the switch base.
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |