Integration Relay On-Vehicle Inspection


  1. INSPECT INTEGRATION NO.1 RELAY

Integration Relay -- On-Vehicle Inspection



1. INSPECT INTEGRATION NO.1 RELAY


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.5L-E Engine Control System.Integration Relay.Integration Relay On-Vehicle Inspection

  1. Using a screwdriver, detach the 2 claws and disconnect the integration relay from the engine room junction block.

    HINT:
    Tape the screwdriver tip before use.


    Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.5L-E Engine Control System.Integration Relay.Integration Relay On-Vehicle Inspection

  1. Measure the voltage of the MAIN relay.

    Standard resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1J-4 - Body ground
    		Ignition switch ON
    		10 to 14 V
    If the result is not as specified, replace the integration relay.